Luxury 60cm Hoop Wedding Cake Stand

This handmade 60cm hoop and 35cm round rustic base is perfect for your wedding.

Suitable for a 3 tier cake that will be no wider than 22cm or 50cm tall.

The base is made with reclaimed recycled 2.5cm thick timber planks not new wood.

PLEASE NOTE - They fit together by the hoop sitting between the timber planks which are 2.5cm deep and a minimum of 4cm of the hoop size will be used up by this.

BASE FINISHES

Light Rustic -  has the distressed weathered appearance plus a light varnish top coat.

Dark rustic - has a distressed weathered appearance but has a dark waxed applied plus a varnish top coat.

White Wash is painted white and sanded back to a distressed finish and you can see the grain of the wood in places.

Black & Grey Wash is a solid paint finish but you can see the grain of the wood in places.

Metallic colours (Limited range)  - where the grain still shows through but is given a light coat of finishing varnish.

There’s a choice of metallic finishes Gold, Rose Gold, Silver, Gun metal grey and Copper - See  RUSTOLEUM spray paint for the colours of metallics used (available on Amazon)

❤️ Decoration not included - suitable for DIY use. Hoop care -  Please be aware that the hoops may tarnish or could chip with over use (especially if used at Weddings every week) and the hoop is made from welded steel and if left out in changing weather conditions or is exposed to water the steel will rust over time - HOWEVER the hoops can sprayed with rustoleum spray (available in all the metallic colours used) so if you lightly sand the hoop you are able to re-spray the hoop again - a new coat of rustoleum will bring them back to life and you can continue to use the hoop for a number of years.

Please note that everything we make in metal is handmade and there will be a welded joint and some minor inperfections. We strive to make as many lovely accessories and props as possible and we hope you are satisfied with the product. Thank you.❤️